General Description; Scope Of Delivery; Function Description; Overview - Deltafox DG - CHT 2014 Traduction De La Notice D'utilisation Originale

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 44
GB
The operator or user is responsible for
accidents or damage to other people or
their property. The manufacturer is not li-
able for damages caused by unspecified
use or incorrect operation.
Before use, check that the blades
are sharp. Ensure that the blades
are sharpened whenever blunt,
in order to avoid overstressing of
the machine. Damages caused by
cutting with blunt blades are not
covered by the guarantee.

General Description

See the front fold-out page for
illustrations.

Scope of delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the pack-
aging material correctly.
-
Cordless hedge trimmer
-
Front handle
-
Hand protection
-
6 screws 4x10
-
Blade guard
-
Battery
-
Battery charger
-
"Charger and rechargeable battery"
operating instructions
-
Instruction Manual

Function Description

The cordless hedge trimmer features a
high-quality knife made from special la-
sercut steel. When trimming, the cutting
teeth move to and fro in a linear shearing
motion.
20
Operators are protected by the appli-
ance's two-hand safety switch and quick-
stop brake function. The hand protection
guards your hands against twigs and
branches. Read the sections below to
learn more about each operating ele-
ment's function.

Overview

1 Safety knife bar
2 Hand protection
3 Safety switch
4 Front handle
5 Ventilation slots
6 On/Off switch
7 Rear handle
8 Battery release buttons
9 Battery
10 Charger
11 Blade guard
12 Screws
13 Rear handle guide
14 Hand protection guide

Technical Data

Cordless
Hedge Trimmer ................ DG-CHT 2014
Motor voltage ............................... 20 V
Idling speed n
.................1400 min
0
Runtime ................................max. 45 min*
Cutting length ..................... appr. 500 mm
Length of knife .................... appr. 600 mm
Max. cutting capacity ........... appr. 13 mm
Weight (with battery, without
blade guard, without charger) .........2.6 kg
Sound pressure level
(L
) ....................... 79.1 dB(A), K
pA
(rpm)
-1
=3 dB
pA

Publicité

Table des Matières
loading

Table des Matières