Maintenance; Storage; Waste Disposal And Environmental Protection - Deltafox DG - CHT 2014 Traduction De La Notice D'utilisation Originale

GB
Do not use cleaning agents or sol-
vents. You may otherwise irreparably
damage the appliance.
• Always keep the equipment clean. Af-
ter using the equipment, it is impera-
tive to:
- Clean the blade
(with an oily cloth);
- Oil the blade
shaft with an oil can
or spray.

Maintenance

• Prior to every use, check the appli-
ance for obvious defects such as
loose, worn or damaged parts. Check
that the screws in the safety knife bar
( 1) are tight.
• Check covers and safety devices (see
) for damages and correct installa-
tion. Replace as necessary.
• You can smoothen minor nudges in
the cutting teeth yourself using a knife
grinder to sharpen the cutting edges.
The trimmer will only cut well if the
teeth are sharp.
• Blunt, bent or damaged knife bars to
be replaced.
Ask our service centre to carry out any
work that is not described in these in-
structions. Use only original parts.

Storage

• Keep the device in the blade guard
( 14) supplied, dry and out of reach
of children.
28
Waste Disposal and Envi-
ronmental Protection
Remove the battery from the device and
take the device, battery, accessories and
packaging for environmentally friendly
recycling.
Machines do not belong with do-
mestic waste.
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
• Throw the cut grass on the compost.
Do not throw it in the normal house-
hold waste.