LG D005KD1N111 Manuel D'installation page 35

F
G
Disconnecting the plug
Press down the release knob with a screw driver, and separate the plug from the connector.
WARNING
Never connect or disconnect the plug under load. The plugs are not suitable for interrupting the
current.
Assemble the rubber seal into the
housing and fasten the cable gland to the
housing using 30 mm wrench. (4.5 N.m)
Connect the AC cable plug to the AC
grid cable connector at the bottom of
the product.
And then connect the additional
grounding wire to the additional
grounding connector. (M4)
Installation
35
2