Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operation
Flex zone Plus
Cooking Zone 1
Cooking Zone 2
Cooking Zone 3
Cooking Zone 4
With Flex zone Plus, you can use a combination of different cooking zones to
enlarge the cooking area. See the table below for the corresponding sensor to
touch to activate the different combinations.
Cooking Zone
1 burner
1
2
3
4
NOTE
When using only one cooking zone, the diameter of the bottom of the
cookware must be less than 14 cm.
The hob may take 5-10 seconds to recognize the position of cookware.
Noises may occur while the hob recognizes the cookware.
Do not remove cookware during cooking. For safety purposes, the hob
automatically stops if cookware has been removed for more than 5 seconds.
24 English
NZ30K7880U_DG68-00823A-06_EN+MES+CFR.indb 24
The Flex zone is the large cooking area
located on the left side of the hob (see the
figure below) that is specially designed to
accommodate multiple pots and pans of
varying shapes and sizes at once. The Flex
zone has four zones that are operated by
individual inductors, allowing you to cook
regardless of where cookware is placed on a
cooking zone.
2 burner
3 burner
4 burner

Sound on/off

1.
2.
3.
4.
To change the Sound On/Off setting, you
must operate the Sound On/Off function
within 10 seconds of turning the power on.
Touch the POWER key for
approximately 1 second.
Touch the
key for 3 seconds within
10 seconds of pressing the POWER key.
Sound will turn off and
will appear
in the Timer display.
To change the Sound setting, repeat
Steps 1 and 2.
Sound will turn ON and
will appear
in the Timer display.
NOTE
2018-08-29
2:27:57

Publicité

Table des Matières
loading

Table des Matières