Geberit ECO 203 Mode D'emploi page 29

WARNING! The pressing attachment can be damaged by an incorrect
pressing operation. Replace and scrap damaged pressing attachments. If
you suspect that the pressing attachment is damaged, replace it and have
the damaged pressing attachment tested by an authorised repair shop.
CAUTION! Danger of crushing! Keep hands away from the pressing
attachment.
3
Press the start button for approx. 2 seconds.
Result
The pressing procedure proceeds automatically and the green LED switches
off. The pressing point is illuminated during the pressing operation by two
white LEDs.
After the pressing operation has been completed, the roller drive returns to
its starting position. The green LED lights up and the pressing tool is ready for
operation again.
Cancelling the pressing procedure
1
Press and hold release button.
Result
The roller drive in the pressing tool returns to its starting position.
The pressing procedure must be repeated for a complete press connection.
The pressing attachment must not be removed or rotated at this time.
B1279-001 © 02-2016
966.996.00.0 (00)
EN
29