Geberit ECO 203 Mode D'emploi page 21

User qualifications
Without suitable training, users cannot detect or can
incorrectly estimate the hazards presented by the pressing
tool. They are therefore at risk of seriously injuring themselves
or others.
• Skilled persons qualified in pipe installations only may be
permitted to use the pressing tool
• Users must be conversant with and apply country-specific
safety regulations
• Users working with the pressing tool for the first time must
have been instructed by an expert in the safe handling of the
pressing tool or have attended a specialist course
Following information and instructions
Failure to observe the safety notes and instructions can lead
to an electric shock, fire and/or serious injuries.
• Before commissioning, read and observe the following
documents:
- enclosed document "Basic safety notes for electric tools"
- operating instructions for the pressing attachments in
question
• Read and observe the safety notes for the cleaning agents
and lubricants used
• Store all safety notes and instructions for future use
• Maintain the warning note stickers, safety notes and
specification plate on the pressing tool and replace if they
become lost or illegible
B1279-001 © 02-2016
966.996.00.0 (00)
EN
21