Cleaning And Maintenance - Remington SHORTCUT CLIPPER Guide D'utilisation Et D'entretien

Cleaning and Maintenance

Cleaning
Before You Begin
1. The hair clipper shall be detached
from the power supply cord before
cleaning.
2. The hair clipper shall not be used
until it has dried.
This appliance is a
washable product,
the hand-held part
of which may be
cleaned under water.
How To Clean
1. First remove the attached comb
from the clipper by pulling it firmly
away from the blades.
2. For best
results, you
can remove
the inside
blade guard
to expose the
blades.
3. Then use
the brush
provided to
sweep away hair clippings from
the product.
4. This device can also be rinsed
under the faucet to remove any
remaining debris.
5. After cleaning is complete,
reassemble the blade guard to
the product by snapping it into its
original position.
6. Reattach the comb to the product.
note: After rinsing, the blades should
be oiled for optimum performance
and product life.
Blade Care
The life of your clippers will depend
on frequency of use, care, and hair
type and condition. The Shortcut
Clipper blades are lubed for life for
your convenience. However, if you
rinse the product under running
water, an oil bottle has been provided
to re-oil the blades.
9