Fire Hazard - DS Produkte Z 07130 Mode D'emploi

paired by a qualifi ed workshop. Contact customer service if ne-
cessary. Improper repairs could pose serious risks for the user.

Fire hazard

Do not use the product if fl ammable gases are present in the air.
■
Do not use the prouct when it is rolled up. Only use the LED
■
strip, when it is rolled out.
Caution – damage to property
■ Always mount the product on a dry surface at a suffi cient distance to fl ammable
objects and sources of heat like stovetops, ovens, heaters. Do no place any open
fl ames, e. g. burning candles, in the direct vicinity of the product, mains adapter and
cables.
■ Do not place any containers fi lled with liquids, e.g. vases, on or directly next to the
product, mains adapter and cables.
■ Do not subject the product, mains adapter and cables to extreme temperatures,
severe changes in temperature or direct sunlight.
■ Do not place any heavy objects on the product, mains adapter and cables.
■ Only connect the mains adapter to a properly installed socket. The socket must also
be easily accessible after the device has been connected. The mains voltage must
correspond to the technical data of the mains adapter. Only use proper extension
cords whose technical data correspond to those of the mains adapter.
■ Make sure that the connector cables do not get pinched, kinked or laid over sharp
edges and do not come into contact with hot surfaces.
■ Do not pull or carry the product by the cable.
■ If the product, mains adapter and cables exhibit visible damages, the product may
not be used. Do not use the product if it had a malfunction or liquid has penetrated
the product or mains adapter.
■ Do not expose the product to severe shocks.
■ Do not use corrosive or abrasive cleaning products to clean the product. They could
damage the surface. When needed, dust off the product with a soft, dry or damp
cloth.
11 EN