BaByliss PRO FLASH Mode D'emploi page 9

USER MAINTENANCE
INSTRUCTIONS
MAINTENANCE OF THE BLADES
Always apply oil to the blades
before and after use. This will
e n s u r e m a x i m u m c u t t i n g
performance.
Hold clipper away from your body
in a downward position and apply
oil on the front and sides of the
cutter blade. Wipe off excess oil
with a soft dry cloth.
REPLACEMENT OF BLADE SET
(Fig. 1)
To maintain optimal performance,
the blades should be cleaned and
oiled regularly.
The blades of the BaByliss®PRO
clipper are removable for easy
cleaning.
Set the blades in the longest length
cutting position.
Hold the clipper with the blade
frame pointing up and push up to
slide the blade frame out.
Remove hair from the blades using
the cleaning brush.
Oil the blades with the oil provided
with the clippers. Never use any
other product; the oil provided is
specially formulated for clippers
and won't evaporate or slow the
blades down.
After cleaning, replace the blade
set by snapping back into place.
Any other servicing should be
per formed by an authorized
service representative since the
appliance has no other user-
serviceable parts.
The product is for professional use.
Do not pull, twist, or wrap line cord
around appliance.
BaByliss®PRO cutting blades are
ground from the finest quality
steel and are hardened to extend
the cutting performance.
As with any cutting appliance,
the blades' cutting edges will
become dull from repeated usage.
Increasing blade tension to force
blades to cut can cause the clipper
to overheat and reduce motor
life. When the cutting blades no
longer cut smoothly, replacement
is required.
9