Maintenance And Cleaning; Protection Of Plastic Surfaces; Door Glasses - Beko DNE 54540 Manuel D'utilisation

6

Maintenance and cleaning

A
Never use gasoline, benzene or
similar substances for cleaning
purposes.
B
We recommend that you unplug the
appliance before cleaning.
B
Never use any sharp abrasive
instrument, soap, household
cleaner, detergent and wax polish for
cleaning.
C
Use lukewarm water to clean the
cabinet of your refrigerator and wipe
it dry.
C
Use a damp cloth wrung out in
a solution of one teaspoon of
bicarbonate of soda to one pint of
water to clean the interior and wipe it
dry.
B
Make sure that no water enters the
lamp housing and other electrical
items.
B
If your refrigerator is not going to be
used for a long period of time, unplug
the power cable, remove all food,
clean it and leave the door ajar.
C
Check door seals regularly to ensure
they are clean and free from food
particles.
A
To remove door racks, remove all the
contents and then simply push the
door rack upwards from the base.
Protection of plastic
surfaces
C
Do not put the liquid oils or oil-
cooked meals in your refrigerator
in unsealed containers as they
damage the plastic surfaces of your
refrigerator. In case of spilling or
smearing oil on the plastic surfaces,
clean and rinse the relevant part of
the surface at once with warm water.

Door Glasses

C Remove the protective foil on the
glasses.
C There is a coating on the surface of
the glasses. This coating minimizes
the stain build-up and helps to
remove the possible stains and dirt
easily. Glasses that are not protected
with such a coating may be subject
to persistent binding of air or water
based organic or inorganic dirt
such as limescale, mineral salts,
unburned hydrocarbons, metal
oxides and sliciones that can easily
and quickly cause stains or material
damage. Keeping the glass clean
becomes too difficult despite the
regular cleaning. Consequently, the
appearance and the transparency
of the glass deteriorates. Harsh
and corrosive cleaning methods
and compounds will intensify
these defects and speed up the
deterioration process.
C Water-based cleaning products
that are not alkaline and corrosive
must be used for regular cleaning
purposes.
C Non-alkaline and non-corrosive
materials must be used for cleaning
so that the service life of this coating
lasts for a long time.
C These glasses are tempered to
increase their durability against
impacts and breaking.
C A safety film is also applied to their
rear surfaces as an extra safety
measure in order to prevent them
from causing damage to their
surrounding in case of a breakage.
*Alkali is a base that forms hydroxide
ions (OH¯) when it is dissolved in
water.
Li (Lithium), Na (Sodium), K (Potassium)
Rb (Rubidium), Cs (Cesium) and
artificial and radioactive Fr (Fan-sium)
metals are called ALKALI METALS.
18
EN