FAR DGV18CH Manuel D'utilisation page 70

ENGLISH
C
(A) Sealing strip
(B) BRACKET
(C) SCREW
GB-24
1. Place the bracket
A
B
2. Put the hob back in
3. Under the hob, adjust
(B) on the holes that
correspond to the size
of the screws. There is
a set of screws for the
holes in each corner of
the hob (H). Lightly
tighten one screw (C)
through the bracket
(B) so that the bracket
attaches to the hob but
in such a way that the
hob can still be adjusted.
place and then gently
lower it into the
opening you have cut
into your worktop.
the brackets to the
appropriate position
for your worktop. Then
retighten the screws
completely (C) to secure
the hob in position.