Appliance Installation - FAR DGV18CH Manuel D'utilisation

ENGLISH

APPLIANCE INSTALLATION

• This appliance must be integrated in a kitchen
cupboard or worktop of 600mm, if the
following dimensions are respected;
• The edges of the hob must be a minimum
distance of 60 mm from a side or a wall.
• 700 mm between the highest point of the
surface of the hob (including the burners) and
the bottom of any horizontal surface directly
above it.
• 400 mm between the surfaces of the hob,
if the bottom of any horizontal surface is
flush with the outer edge of the hob. If the
underside of the horizontal surface is less than
400 mm, then it must be at least 50 mm from
the outer edges of the hob.
GB-20
SPACES
REQUIRED
DURING
INSTALLATION
OF THE HOB
WITH AN
EXTRACTOR
HOOD ABOVE