Troubleshooting Tips - Abus CO2WM110 Manuel D'utilisation

Settings, Troubleshooting
View alarm protocol
Set temperature unit

Troubleshooting tips

1. The device will not switch on
→ Check that the power supply unit is powered and that the meter is firmly
plugged in.
2. Low battery power
→ Charge the battery for more than 24 hours.
3. Slow response
→ Check that the airflow channels on the back of the meter are not blocked.
4. The detector displays "Sensor error"
→ Contact your dealer.
5. Manual calibration
→ Fresh and dry outdoor air is required for manual calibration when the CO
value is approx. 500 ppm. Do not calibrate the detector in the rain.
Kohlendioxidmelder_CO2WM110_Manual_1.indd 26 Kohlendioxidmelder_CO2WM110_Manual_1.indd 26
1. Move to the previous entry by pressing the
to the next entry by pressing the
2. Press the button to exit and return to the main
settings menu
1. Select °C (degrees Celsius) or °F (degrees Fahrenheit) by
pressing the button
2. To exit and save the selected settings, press the button
and go back to the main settings page
– 26 –
button
or
button and
2
19.02.2021 15:14:00 19.02.2021 15:14:00