Abus CO2WM110 Manuel D'utilisation page 23

LED display and tones
Status
Screen off, CO
content good
Screen on, CO
content good
Screen off, CO
content normal
Screen on, CO
content normal
Screen off, CO
content poor
Screen on, CO
content poor
• When powered via AC adapter: If the carbon dioxide level is poor at the time the
device is switched on, the red LED will flash and the alarm will sound for
30 seconds. Afterwards, the red LED will remain lit until the CO
normal.
• With battery supply: If the carbon dioxide level is poor at the time the device is
switched on, the red LED will flash and the alarm will sound for 30 seconds. After
that, the red LED will light up for 1 minute; then the screen will switch off.
Kohlendioxidmelder_CO2WM110_Manual_1.indd 23 Kohlendioxidmelder_CO2WM110_Manual_1.indd 23
LED
flashes green
2
every 5 seconds
lights up green
2
flashes yellow
2
every 5 seconds
lights up
2
yellow
flashes red
2
every 5 seconds
lights up red
2
Operating buttons and display symbols
Display
normal
Data flashing
Data flashing
Data flashing
Data flashing
Data flashing
– 23 –
Sound
-
-
-
-
Alarm tone for 30
seconds
Alarm tone for 30
seconds
content returns to
2
19.02.2021 15:13:57 19.02.2021 15:13:57
GB