Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 28
• To place or replace the blades open the appliance
by rotating the knob counter-clockwise and ope-
ning the housing.
• Always place the nylon disc first before placing
the blade of your choice.
• To remove a blade turn it counter-clockwise and
then lift it.
• Close the appliance and turn the round knob
clockwise to lock the housing. Press the on but-
ton to automatically place the blade in the correct
position.
• Contains different knives for different cutting re-
sults and 1 nylon disc:
- 2 mm slice disc
- 4 mm slice disc
- 3 mm grater
- 4,5 mm grater
- 7 mm grater
- The nylon disc should always be placed under a
knife to push the vegetables out of the machi-
EN
NL
ne.

Important

• WARNING! Never use the hands to press the cut
food. Always use the supplied plunger.
• Never use frozen vegetables
Cleaning and Maintenance
Attention: Always unplug the appliance from the electrical power outlet and let it cool down completely
before cleaning and storage.
Cleaning
• Clean the appliance after each use.
• Never immerse the appliance in water or other
liquids.
• Clean the cooled exterior surface with a slightly
damp cloth or sponge with some mild soap so-
lution.
Storage
• Before storage, always make sure the appliance
has already been disconnected from the electri-
cal outlet and cooled down completely.
• Store the appliance in a cool, clean and dry place.
6
• Do not use wooden/metal or plastic objects ex-
cept the polyethylene mesher that presses the
vegetables.
• Never use abrasive sponges or detergents, steel
wool or metallic utensils to clean the interior or
exterior parts of the appliance.
• Blades of the cutting disks may become dull after
prolonged use. Check this regularly and contact
the supplier for service.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

231807

Table des Matières