LF Master Forge BG2294B-LS Mode D'emploi page 28

OPERATING INSTRUCTIONS
Checking orifice alignment with burners
Orifices may shift during assembly and movement. Check the orifice alignment with the burners
according to the following illustrations before lighting.
Orifices stud
inside the air
Orifices stud
inside the air
shutter
LIGHTING
Warning: Do not lean over grill when lighting.
1. Check that the control knobs are in the OFF position.
2. Open LP cylinder valve.
3. Open lid during lighting.
4. Press and turn the knob slowly to HIGH position. The
burner should light within three attempts.
5. If burner does not light, turn the knob to OFF, wait 5
minutes and then repeat step 4.
6. Once burner is lit, rotate knob to desired heating level
from High to Low.
Main Burner and Orifice
Side Burner and Orifice Relationship
HIGH
28
OFF
LOW