LF Master Forge BG2294B-LS Mode D'emploi page 23

OPERATING INSTRUCTIONS
WARNING: The Type I connective
coupling (see Fig. A) supplied with your
grill must not be replaced with a different
type of grill/tank connection system.
Removal will result in loss of warranty, gas
leakage, fire and severe bodily harm.
Disconnecting A Liquid Propane Gas (LP
Gas) Tank From Your Grill:
1. Turn the burner knobs and LP gas tank
valve to the full OFF position.
(Turn clockwise to close.)
2. Detach the hose and regulator assembly
from the LP gas tank valve by turning the
quick coupling nut counterclockwise. See
Fig. B.
CAUTION: When the appliance is not in
use, the gas must be turned off at the
supply tank
.
L.P. TANK INFORMATION
Never use a dented or rusted L.P. tank or cylinder with a damaged valve.
L.P. cylinders are equipped with an O.P.D. (Overfilling Prevention Device). The device shuts off
the flow of gas to a cylinder after 80% capacity is reached. This limits the potential for release of
gas when the cylinder is heated, averting a fire or possible injury.
The L.P. cylinder must have a shut-off valve terminating in an L.P. gas supply cylinder outlet
specified, as applicable, for connection No. 510 in the standard for compressed gas cylinder
valve outlet and inlet connection ANSI/CGA-V-1. Cylinders must not be stored in a building,
garage, or any other enclosed area. (The L.P. cylinder must have an overfill protection device
and a collar to protect the cylinder valve.)
The L.P. gas supply cylinder must be constructed and marked in accordance with the
specifications for L.P. gas cylinders of the U.S. Department of Transportation (DOT) or the
National Standard of Canada, CAN/CAS-B339, "Cylinders, Spheres and Tubes for the
Transportation of Dangerous Goods and Commission."
Fig. A
Fig. B
23