OBO Bettermann UDHome2 U PE Instructions De Montage page 24

Performing the electrical installation
R emove the mounting cover and open the
hinged lid .
I nsert strain reliefs in front of the installation
pipe .
I nsert the connection cable for the sockets
and strip it by approx . 150–200 mm .
F ix the connection cable by pushing the
strain relief together .
I nsert suitable installation devices (e .g .
socket inserts) into the mounting support as
shown and connect them . Also connect the
PE connection of the service outlet .
I nsert the mounting support in the service
outlet and screw it tight .
24