Setting The Alarm - Yamaha TSX-B235 Mode D'emploi

Masquer les pouces Voir aussi pour TSX-B235:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the alarm

Setting the alarm time and alarm type
The alarm will not function when the unit is in ECO standby. To use the alarm function, set the rear panel CLOCK switch to the ON position
(+ P. 3).
1
2
3
Alarm time
9 : 1 2
C o m p l e t e d !
Alarm indicator
1
Press SET.
The alarm indicator (
2
Set the alarm.
Set items
1
-
5
described below.
Press –/+ to select a numerical value, and press ENTER to confirm it.
Items
1
ALARM SELECT
* This can be selected after you've used "DTA
ONE DAY: An alarm that sounds only once at the
WEEKLY: An alarm whose time can be specified for
If you've chosen WEEKLY, this completes the alarm
setting.
ALARM TIME
2
Make settings in the order of hours
ALARM TYPE
Select from SOURCE+BEEP, SOURCE or BEEP. For
3
details, refer to "3 types of alarms" (+ P. 16).
If you selected BEEP, proceed to item
4
ALARM SOURCE
CD:
(If you selected
SOURCE+BEEP or
SOURCE as the
USB:
alarm type)
FM/AM
If the selected source cannot be played back at the time set
for the alarm, the beep sound is played back.
ALARM VOLUME Specifies the volume (5-60) of the alarm.
5
*1
If you choose RESUME when specifying the track/folder/preset number, the last-
played track/folder/station will be played (resume playback)
*2
AM radio is available only for North America model.
3
Complete the settings.
When you set the VOLUME for item
"Completed!" and your settings will be confirmed.
The alarm will be turned on and the alarm indicator (
• By pressing SET during this procedure, you can confirm the alarm settings with the
currently-specified values and complete the procedure.
• If you decide to cancel alarm settings mid-way through the procedure, press
USING THE ALARM FUNCTION (IntelliAlarm)
) will blink.
Setting or range
CONTROLLER" to set the alarm (+ P. 19). If you're not
using "DTA CONTROLLER," proceed to item
specified time.
each day of the week (settable only using
"DTA CONTROLLER").
Play back music from a CD.
Specify the track number (data CD: folder
number) (RESUME
Play back music from a USB device.
Specify the folder number (RESUME, 1-
999).
*2
:Play a radio station.
Specify the preset number (RESUME, 1-30).
5
, the display will indicate
2
.
minutes.
5
.
*1
, 1-99).
) will light.
.
17
En

Publicité

Table des Matières
loading

Table des Matières