In Case This Message Is Displayed - JVC DLA-RS65 Manuel D'instructions

5
In case this message is
displayed
Message
COMP
NO Input
COMP.
Lamp replacement
86
Others
No device is connected to the input terminal.
The input terminal is connected but there is no signal.
Input the video signals.
A video signal that cannot be used in this unit has been input.
Input video signals that can be used.
* The names of input terminals such as COMP. will be displayed in yellow
This message is displayed when the accumulated lamp time has
exceeded 2900 hours.
To clear the message, press the [Back] button.
Back
Get ready a new lamp unit and replace as soon as possible. Reset
BACK
the lamp time after replacing the lamp. (Reference page: 78 to 81)
Cause (Details)