JVC DLA-RS65 Manuel D'instructions page 79

5
Install the new lamp unit
6
Tighten the screws of the new lamp
unit
● Tighten the screws with a
7
Attach the lamp cover
● Insert the top part (with 2 claws) of the lamp cover into
the unit.
Fasten the screws with a
●
Handle
screwdriver.
screwdriver.
ENGLISH
CAUTION
● Use only genuine replacement
parts for the lamp unit. Also,
never attempt to reuse an old
lamp unit. This may cause a
malfunction.
● Do not touch the surface of a
new lamp. This may shorten
the lamp life and cause lamp
blowout.
MEMO
After Replacing the Lamp
Do not place the removed
●
lamp unit at locations that is
reachable by children or near
combustible items.
● Dispose used lamp units in
the same way as fluorescent
lamps. Follow your local
community rules for disposal.
79