Troubleshooting - Beko BU 1153 Manuel D'utilisation

Masquer les pouces Voir aussi pour BU 1153:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

7

Troubleshooting

Check this list before contacting the
service. Doing so will save you time
and money. This list includes frequent
complaints that are not related to
faulty workmanship or materials.
Certain features mentioned herein
may not apply to your product.
The refrigerator is not working.
The power plug is not fully
settled. >>> Plug it in to settle
completely into the socket.
The fuse connected to the
socket powering the product
or the main fuse is blown. >>>
Check the fuses.
Condensation on the side wall of
the cooler compartment (MULTI
ZONE, COOL, CONTROL and FLEXI
ZONE).
The door is opened too
frequently >>> Take care not
to open the product's door too
frequently.
The environment is too humid.
>>> Do not install the product
in humid environments.
Foods containing liquids are
kept in unsealed holders. >>>
Keep the foods containing
liquids in sealed holders.
The product's door is left open.
>>> Do not keep the product's
door open for long periods.
The thermostat is set to too
low temperature. >>> Set
the thermostat to appropriate
temperature.
Compressor is not working.
In case of sudden power failure
or pulling the power plug off
and putting back on, the gas
pressure in the product's cooling
system is not balanced, which
triggers the compressor thermic
safeguard. The product will
restart after approximately 6
minutes. If the product does not
restart after this period, contact
the service.
Defrosting is active. >>>
This is normal for a fully-
automatic defrosting product.
The defrosting is carried out
periodically.
The product is not plugged in.
>>> Make sure the power cord
is plugged in.
The temperature setting is
incorrect. >>> Select the
appropriate temperature
setting.
The power is out. >>> The
product will continue to operate
normally once the power is
restored.
The refrigerator's operating noise
is increasing while in use.
The product's operating
performance may vary
depending on the ambient
temperature variations. This is
normal and not a malfunction.
The refrigerator runs too often or
for too long.
The new product may be larger
than the previous one. Larger
products will run for longer
periods.
18
EN

Publicité

Table des Matières
loading

Table des Matières