Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
en | 1 | EV2000 Series Wallbox Charger Installation and Operation Manual
1.0 Introduction
The DC Wallbox Charger is the top choice for powering
battery electric vehicles (BEV) and plug-in electric vehicles
(PHEV) today. It is designed for quick charging in both pub-
lic and private locations, such as retail and commercial
parking spaces, fleet charging stations, highway rest areas,
workplaces, residences, etc.
The DC Wallbox charger has the advantage of easy installa-
tion. The wall-mounting design and pluggable power mod-
ules realize flexible and cost-effective installation for differ-
ent types of locations.
The DC Wallbox charger also has network communication
capability. It is able to connect with remote network systems
and provide drivers of electric cars real-time information,
such as the location of charging stations, charging progress,
and billing information.
DC Wallbox charger has a clear user interface with function
buttons, safety system of power supply, and excellent water-
proof and dust proof technology to provide the best choice
for outdoor environments. It can also integrate with renew-
able energy, such as solar power and wind power technol-
ogy, to provide the most energy saving infrastructure for EV
system development.
1.1 Features
Wall-mount design and pluggable power modules make
`
installation easy and flexible.
Offers customers the convenience of full start and stop
`
charging control from an authorized RFID smart card.
Built on latest industry standards for DC charging.
`
Carries an outdoor rating capable of withstanding solid
`
and liquid intrusions in outdoor settings making the unit
more stable and highly reliable.
Provides a high-contrast, OLED screen interface with
`
multi-function buttons
1.2 Applications
Public and private parking areas
`
Community parking areas
`
Parking areas of hotels, supermarkets and shopping
`
malls
Workplace parking areas
`
Charging stations
`
Highway rest areas
`
Bosch Automotive Service Solutions Inc.
2.0 Important Safety and
Wiring Instructions
2.1 Installation Site Selection
DC Wallbox can be installed in both indoor and outdoor
environments. It is necessary to consider the
installation conditions and protection at the site:
Follow local electrical regulation and installation
`
standards.
Consider the emergency routes at the installation
`
site.
Do not install the device at potentially explosive
`
atmosphere areas (Ex areas).
2.2 Safety and Compliance
Read the manual before installation or usage of
`
device.
Do not put tools, material, or body parts into the
`
electric vehicle connector.
Do not use the DC Wallbox charger if the cabinet,
`
power cord, or charging cable are frayed, have
broken insulation, or any other signs of damaged.
Do not install or use the DC Wallbox charger if the
`
enclosure is broken, cracked, open, or has any
other indications of damage.
The DC Wallbox charger should be installed only by
`
a qualified technician.
Make sure that the materials used and the installa-
`
tion procedures follow local building codes and
safety standards.
The information provided in this manual in no way
`
exempts the user of responsibility to follow all
applicable codes or safety standards.
The manufacturer is not responsible for physical
`
injury, or damage to property or equipment caused
by the installation of this device.
This document provides instructions for the DC
`
Wallbox charger and should not be used for any
other product. Before installation or use of this
product, review this manual carefully and consult
with a licensed contractor, licensed electrician, or
trained installation expert to ensure compliance
with local building codes and safety standards.
579604 | REV. C | June 2020
Publicité
Chapitres
Table des Matières
