Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4 / Personalisation of the Daily programs :
Press
, then choose the program you want to personalise from
,
.
1.
Press
for 3 seconds, the icon
2.
The first segment of 00 : 00 flashes. Example program P1 :
MUse
to choose how to allocate this first hour. (
economic
and for frost mode
3.
Use
or
to go to the next or previous hour of the program. Repeat 2 until
each segment of the program is customised.
4.
Press
for 3 seconds to confirm your program. The icon
screen.
NOTE: The new program replaces the old program in the
memory of the radiator. If you are not satisfied about your
personal settings, you can find the preset of the factory.
Turn the unit off using the switch located behind the unit.
Then press the button for 7 seconds to reset the heater.
5 / Weekly programming :
1.
Press
once.
to
appears on the display.
for comfort
)
disappears on the
2.
Choose the daily program
, using
3.
Press
once to confirm your choice
1.
Press
for 3 seconds, the icon
2.
The number 1, representing MONDAY and the program corresponding P1 will
flash.
,
for
3.
Assign by using
selection with
you have assigned a program for each day of the week (1 - to 7 Monday-Sunday)
4.
After assigning the program to 7-Sunday, confirm your selection with
icon
disappears on the display.
5.
The heater then operates in accordance with the new weekly program that you
have just created.
by using
or
.
appears on the display.
or
a program (from P1 to P7) for Monday. Confirm your
. The number 2 will blink- representing Tuesday. Repeat until
78 | 79
GB
. The
Publicité
Table des Matières
