ThermoPro TP-17 Mode D'emploi page 15

Masquer les pouces Voir aussi pour TP-17:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

pieces of meat or two sections of the same large piece of
meat simultaneously.
Place food into the oven. Before closing the oven door,
make sure there is enough slack in the steel mesh cable
EN
to prevent the probe from being pulled out of the food
when the oven door is closed. The device must be
positioned outside of the oven on a stable surface and
must be firmly connected to the temperature probes.
To prevent damage to the device, it should not be placed
on a hot surface.
When the internal temperature of your food reaches the
temperature you have set, an audible alert will sound.
Press any button to stop the alert.
Before removing the food from the oven, disconnect the
steel mesh cables from the device. Do not touch hot
probe or wire with bare hands during or just after cooking.
Always wear a heat-resistant glove.
Quick Temperature Setting
Your digital cooking thermometer is pre-programmed
with temperatures for various cooking levels: poultry
(165˚F), beef well (170˚F), veal/pork (170˚F), beef
medium (160˚F), ham (160˚F) and beef rare/fish (145˚F)
based on the USDA recommendation. See the below
-28-
table.
Press Probe 1/2 to select Probe 1 or 2 for setting. The
display for the selected probe will be flashing for a few
seconds.
Press the MEAT/ST/SP button to enable the option to
adjust quick temperature settings.
Press ▲/HR/
or ▼/MIN/HI/LO button to select your
food type.
Press MEAT/ST/SP to confirm and lock in the setting.
(The device will regard you've confirmed the selection if
you don't press any button for 4 seconds).
Repeat the above process to set the other probe
temperature.
How to Monitor BBQ/Oven Temperature
1. You can select Probe 1 or 2 to monitor BBQ/Oven tem-
perature to make sure it won't exceed or go below the set
High/Low temperatures. Press Probe 1/2 to select Probe
1 or 2 for setting. The display for the selected probe will
be flashing for a few seconds.
2. Press the MEAT/ST/SP button to enable the option to
adjust quick temperature settings.
3. Press the ▲/HR or▼/MIN button to choose BBQ, press
-29-
EN

Publicité

Table des Matières
loading

Table des Matières