ThermoPro TP-17 Mode D'emploi page 12

corresponding probe. In timer mode, press the PROBE
1/2 button to toggle the display of the Probe 1 or 2 tem-
peratures in the first row of the screen.
▲
3. /HR Button: In Cook mode, Press
EN
types while in quick temperature setting. Press ▲ to
increase your desired cooking temperature while in
manual temperature setting. Press to turn ON/OFF the
alarm in BBQ mode. Press the HR button to set hours
while in timer mode. To clear time, press the HR and
MIN buttons at the same time.
4. ▼/MIN/HI/LO Button: In Cook mode, press▼ to select
food types while in quick temperature setting. press ▼ to
decrease your desired cooking temperature setting while
in manual temperature setting. In BBQ mode, press it to
display HI or LO BBQ temperature. In Timer mode, press
this button to set count down minutes. To clear count
down timer setting, press the HR and MIN buttons at the
same time. Press and hold the button for fast setting.
5. MEAT/ST/SP Button: In Cook mode, press the MEAT/ST/
SP button to enable the option to adjust quick temperature
settings. Press again to save selection. The meat types:
Poultry ( ), Pork/Veal (
( ), Beef Medium(
▲
to select food
), Ham ( ), Beef Rare/Fish
), Beef Well Done ( ), and User-
-22-
Defined ( ). The pre-programmed doneness tempera-
ture setting for each meat type is recommended by USDA
(U.S. Department of Agriculture). Press and hold for 3
seconds to enter the BBQ target temperature setting; In
Timer mode, press the ST/SP button to begin the count-
down or count-up timer. Press the ST/SP button to pause
or restart the timer.
6. Probe 1/2 Socket: Insert Probe 1 and/or 2 into the corres-
ponding socket to measure meat or BBQ temperatures.
7. Magnet: Allows user to stick device to a metal surface.
For example, a refrigerator.
8. Backlight: Press any key to activate the back light of the
screen. If there is no key operation for 10 seconds, the
backlight will be automatically turned off. When there is
alarm sound, the backlight will be turned on and flashing.
9. Flip-out Counter Top Stand: Allows user to place device
on counter for easy viewing.
10. C/ F Selector (on the back of the unit): Move the position ° °
of the selector to select the temperature display unit in °C
or °F.
11. Mode Selector (on the back of the unit): Move the position
of the selector to select Cook mode
power off the device.
, Timer mode
-23-
EN
or