Wps Setup (Wi-Fi Protected Setup); Wps Connection Setting - Pioneer BDP-80FD Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WPS setup (Wi-Fi
Protected Setup)

WPS connection setting

WPS is abbreviation of Wi-Fi Protected Setup. A standard
established by the Wi-Fi Alliance industry group for a
function allowing settings related to interconnection of
WPS compatible wireless LAN devices and encryption to
be made with simple operations.
This unit supports push-button configuration and PIN
code configuration.
PBC (Push Button Configuration)
Connection settings are made automatically simply by
pressing the WPS buttons on the WPS compatible
wireless LAN device. This is the simplest way of making
the settings, and is possible when the WPS compatible
wireless LAN device is equipped with WPS button.
PIN Input
Connection settings are made by inputting the 8-digit PIN
code shown on the main display to the access point to
which you selected. Follow the instructions shown in
Connecting using PIN code configuration on the right.
When performing wireless settings set Initial Setup 
Network  Interface to Wireless.
1
Press HOME MENU.
The HOME MENU screen is displayed.
Use /// to select Initial Setup and press
2
ENTER.
The Initial Setup screen is displayed.
Select Initial Setup  Network  Wireless
3
Setting  Next Screen and press ENTER.
A confirmation screen is displayed.
Use / to select Yes, then press ENTER.
4
The Wireless Setting screen is displayed.
Use / to select Auto, then press ENTER.
5
The WPS (Wi-Fi Protected Setup) screen is displayed.
6
Use / to switch between [PBC] or [PIN]
screens.
When connecting using PBC go to step 7.
When connecting using PIN go to step 8.
7
When connecting using PBC (Push Button), on the
[PBC] screen use / to select Next, then press
ENTER.
Then press the WPS button on the access point within
120 seconds.
8
When connecting using PIN confirm the PIN Code
on the [PIN] screen. Use cursor / to select Next,
then press ENTER.
9
Enter into the access point the PIN Code that you
confirmed in step 8 above.
The PIN Code input method differs depending on the LAN
device used. For details, consult the operating
instructions accompanying your LAN device.
07
45
En

Publicité

Table des Matières
loading

Table des Matières