Hayward 7019071 Guide De L'utilisateur page 25

The Control Station is a pool equipment control and treatment regulation system.
The Control Station allows you to control the filtration system (pump) as well as the peripheral equipment (heat pump,
lighting, etc.).
It also allows you to treat your pool effectively via liquid chlorine injection. The Control Station is suitable for treating most
residential swimming pools.
The quantity of chlorine required to treat a pool correctly varies according to the number of bathers, the rainfall, water
temperature and the cleanliness of the pool...
Description
1
pH
Measuring
probe
chamber
Page 4 of 20
GENERAL
INSTALLATION
Temperature
2 x Peristaltic
probe
pumps
USE ONLY GENUINE REPLACEMENT PARTS
Control Station
2
3
1 Control box
2 On/Off switch
3 Power cable
4 Fuse 3.15 A
5 Fuse 630 mA
ORP probe Screen remote kit
4
5
The fuses are either
on the side or the
bottom of the control
box.
Wifi module
(Optional)
Rev. A