Arktic 233412 Mode D'emploi page 7

Operation
• Connect the power plug with a suitable electrical
outlet. Leaving the appliance for running some
Refrigerant LED indicator
• Digital temperature controller operation
1). Setting the temperature
• Press SET to enter into the setting mode. The
set temperature is displayed.
• Press or to increase or decrease the set
temperature.
• Press SET again to confirm the setting and exit.
Then, inside cabinet temperature is displayed.
2). Illumination inside the cabinet
• Press to switch ON the light. Press
3). Refrigerant LED indicator
• During the cooling operation (compressor ena-
bled), this refrigerant LED indicator will lights up
constantly.
4). Defrost LED indicator
• During the defrost operation, this defrost LED
indicator will lights up constantly.
hours to reach the cooling temperature before
placing the beverage or food inside the appliance.
Defrost LED indicator
C
Note:
• If no button is pressed within 10 seconds. The
newly set temperature will be stored.
• The temperature setting range from -14°C to
-18°C. And the cabinet temperature range can be
kept from -13°C to -22°C.
• Keep the door open time as short as possible in
order to keep a cool temperature inside.
again to switch OFF the light.
• After the inside cabinet reach the set temper-
ature, the refrigerant LED indicator will flashes
continuously.
• When defrost start, the refrigerant LED indicator
light off.
• After the defrost operation, defrost LED indica-
tor will lights off.
SET
EN
7