Preparing The Appliance; Preparing Drinks; Information On Recipes; Preparing The Grinder - Krups ESPRESSO AUTOMATIC EA84 Série Manuel D'utilisation

Masquer les pouces Voir aussi pour ESPRESSO AUTOMATIC EA84 Série:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IFU_KR_EA84_NAFTA_EA84 25/10/13 11:01 Page14

Preparing the appliance

Remove and fill the water tank. Fig. 6.
Once filled, put it back on the back of the machine and close the lid. Fig. 7.
Open the lid on the coffee bean hopper and pour in the beans (0.55 lbs maximum). Fig. 8.
Close the lid on the coffee beans hopper. Fig. 9.
Caution: the use of oily, caramelised or aromatic coffee beans is not recommended in this
!
appliance. Since some of these beans are very big, they can damage the appliance.
Caution: make sure that any foreign objects such as small stones in the coffee beans do not
!
enter the hopper. Any damage caused by foreign objects entering the coffee bean
hopper is excluded from the warranty.

Information on recipes

Depending on the recipe selected, your Espresso Automatic EA84XX will automatically adjust
the quantity of ground coffee.

Preparing the grinder

You can adjust the strength of your coffee by adjusting the size of the ground coffee. The finer
the grind the stronger and creamier the coffee, however this depends on the type of coffee
used.
Adjust the size of the ground beans by turning the "Coffee grinding setting" knob (L) in the
bean hopper. We recommend to do this during the grinding process and gradually. After three
preparations, you will notice a very distinctive difference in taste.
The grinding setting is useful when you change coffee recipe, coffee beans, or if you would
like a stronger or weaker coffee. It is not recommended that you perform this setting
systematically.

Preparing coffee drinks

This chapter explains how the appliance operates using the example of the Espresso function.
Press the "Espresso" button.
If the appliance detects a lack of water when you request a recipe, it will ask you to fill the tank.
Place the cup(s) under the coffee spouts.
You can adjust the height of the coffee outlet depending on the size of your cup(s). Fig. 10.
Possible settings
The appliance lets you prepare one or two cups.
Selecting the strength: the more beans selected the coarser the preparation. You can change
the strength using the – and + buttons located to the left and right of the symbols. Press the
"OK" button on the touch screen to launch the preparation.
14

PREPARING DRINKS

Publicité

Table des Matières
loading

Table des Matières