Use Of Rinse Aid; Loading Cutlery And Dishes - Zanussi ZDF1000 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The salt cap has a refill indicator window in the center. A
green float is easy to see when there is a salt inside the
container. It almost goes out of view when the salt is gone.

Use of rinse aid

Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
1
3
5

Loading cutlery and dishes

Helpful hints and tips
Caution! Only use the appliance for household
utensils that are applicable for dishwashers.
Do not use the appliance to clean objects that can absorb
water (sponges, household cloths, etc.).
• Before you load cutlery and dishes, do these steps:
2
4
Fill when the rinse aid in-
dicator ( B ) becomes
clear.
Caution! Do not fill the rinse aid dispenser with
other products (e.g. dishwasher cleaning agent,
liquid detergent). This can cause damage to the appli-
ance.
Adjusting the dosage of rinse aid
– Remove all food remainings and debris.
– Make burnt, remaining food in pans soft.
The rinse aid dial is set at
the factory at position 3.
To increase or decrease
the dosage refer to 'What
to do if...'
21

Publicité

Table des Matières
loading

Table des Matières