Control Panel; Indicator Light - Zanussi ZDF1000 Notice D'utilisation

• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Do not use the appliance:
– if the mains cable or water hoses are damaged,
– if the control panel, worktop or plinth area are dam-
aged, that you can get access to the inner side of
the appliance.

Control panel

1 Programme knob
2 Start/cancel button (Start/Cancel)
3

Indicator light

4 On/off indicator light
Programme knob and on/off indicator light
• To set a washing programme, turn the programme
knob clockwise or anticlockwise. The programme
marker on the programme knob must agree with one
of the washing programmes on the control panel.
Contact your local Service Force Centre.
• Do not drill into the sides of the appliance to prevent
damage to hydraulic and electrical components.
Warning! Carefully obey the instructions for
electrical and water connections.
Indicator light
The indicator light comes on when the washing pro-
gramme is completed. Auxiliary functions:
• Level of the water softener.
• An alarm if the appliance has a malfunction.
– The on/off indicator light comes on (position ON).
• To set the appliance to the off position, turn the pro-
gramme knob until the programme marker agrees with
the on/off indicator light.
– The on/off indicator light goes off (position OFF).
4 3
1 2
17