Philips Avent SCF358/00 Mode D'emploi page 12

ENGLISH
12
Reuse the bottle warmer right away for another container of baby
food
Follow the same steps as indicated in the section "Warm milk"
Keep warm milk
With this setting, the built-in sensor detects the milk temperature to switch to the
optimal setting. If you put warm milk, it is warmed gradually and kept at the right
temperature.
1
Place the bottle in the bottle warmer. Fill with drinking water to the level of
the milk. If you have a large volume of milk, fill with water to approximately
1 cm below the top of the bottle warmer.
2
Select the keep warm / defrost setting and press the on / off button to
switch on.
3
The progress indicator flashes to show that milk is warming.
4
When the entire progress indicator lights up continuously, the milk is ready
for feeding and the bottle warmer keeps the milk at this temperature.