Timer/Delete Button (Timer/Delete) - Denon D-A03 Mode D'emploi

ENGLISH
(1) Timer Registration (continued)
10
Press
Be careful not to turn the volume up too high.
The unit will enter the standby mode and then the playback standby mode automatically.
When the preset time is reached, playback will start.
When the timer end time is reached, the system will enter the power standby mode automatically.
NOTES:
• If the power is turned on while in the standby mode, the timer setting will be cancelle.
• When the timer is not cancelled, timer play is performed every day according to the setting.
• The timer setting will be cleared when the unit is unplugged or the power foilure occurs.
(2) Using the same timer setting
• Even when the timer has been cancelled, once the contents of the timer have been set, they are retained. This allows the
same contents to be set again on the next occasion if a change is not needed, Once memorised, the timer setting can be
used as follows.
1
When the power is on, press
2
Within 10 seconds, press
If " STANDBY " is not displayed, the clock setting has been cleared.
In this case, reset the clock and the timer.
3
Within 10 seconds, press
• The timer settings is displayed in order.
The unit will enter the standby mode and then the playback standby mode automatically.
30
TUNING/
, adjust the volume and then press
PRESET
3
ENTER
Button
TIMER/DELETE
TUNING/
PRESET
ENTER
VOLUME
TUNING/
PRESET
2
ENTER CLEAR TUNING/PRESET
Button
TIMER/DELETE
PLAY MODE
PROG.
1
RC-911
TIMER/DELETE
Button
.
to select " STANDBY ".
.
ENTER
.
VOLUME 12
AM12:00
TIMER