Pari eFlow rapid Mode D'emploi page 41

• Insert the aerosol head (3).
It must snap noticeably into place.
NOTE:
Do not touch the membrane (metal part in
the middle of the aerosol head), it can be
damaged very easily.
• Insert the inspiratory valve (6). When
doing so, check that the two valve flaps
are seated correctly. They must lie per-
fectly flush.
6
®
eFlow rapid - 04/18
• Close the aerosol chamber:
3
• Attach the mouthpiece (7) to the aerosol
NOTE:
If the button closure does not close,
ensure that the inspiratory valve is
seated correctly. It must lie flat against
the aerosol chamber.
chamber.
Info:
For inhalation with a mask, follow the
instructions for use of the mask you
are using.
en
7
37