Babyauto Cubox Notice D'instruction page 18

4. FOLDING/UNFOLDING THE SEAT.
WARNING
Unfolding the seat
1. Release the closing
it under the car seat cover (4.1).
2. Remove the headrest of the car seat of its inner part (4.2).
3. Remove the headrest and tighten the
seat to be able to straighten the back (4.3 y 4.4).
4. Make sure the tabs of the back fit perfectly into the base of the car
seat (4.5 y 4.6).
5. IInsert the headrest into the superior slot of the back part of the
car seat ensuring it fits into the tab
6. Pull the H
hearing a click (4.9, 4.10 y 4.11).
7. Ensure all parts are firm and fitted into its place (4.12).
Folding the seat
1. Pull the H
(4.14 y 4.15).
2. Pull the I
the car sea (4.15).
3. Tighten the
side until it joins the base (4.16).
4. Insert the headrest into the slot between the back and the base of
the car seat (4.17).
5. Secure the car seat with the closing
perfectly in
18 Child restraint system
F strip of the head part of the car seat and keep
piece back and turn on the side of the headrest until
piece back and turn on the side of the headrest inward
tab and remove the headrest releasing from the back of
L lever of the back of the car seat and turn the back
J clip (4.18).
L lever of the back of the car
I (4.7 y 4.8).
F strip ensuring it holds
CUBOX