Babyauto Cubox Notice D'instruction page 17

2. SEAT PARTS AND FITTINGS.
A. Headrest.
B. Vertical belt hook.
C. Cover.
D. Diagonal belt hook.
E. Booster.
F. Locking strap.
G. Hand headrest height adjuster handle.
H. Headrest folding levers.
I. Headrest locking tab.
J. Clip for the locking strap.
K. Instruction manual storage.
L. Backrest folding lever
M. Carry handle
3. HOW TO INSTALL THE CHILD CAR SAFETY SEAT. GROUP 2 & 3.
WARNING
1. According to the child's height the headrest can be adjusted up or
down. Place your hand on the headrest and pull up the lever
pulling the seat down with the other hand so it does not move (3.1).
2. Place the child seat on the seat of the vehicle, ensuring it is pressed
firmly against the back of the vehicle seat (3.2).
3. Place the child in the child car safety seat (3.3).
4. Fasten the belt, ensuring that the lap belt goes through
under both armrests and that the diagonal shoulder belt passes
through B guide and
vehicle anchor point. You will hear a "click" when this is properly
fastened. Ensure that the belts are not twisted and tighten by
pulling the diagonal shoulder belt upwards (3.4, 3.5 & 3.6).
Group 2/3
Use Group 2-3 only from approx. 4 to 12
years of age (15-36 kg)
D guide under the armrest that is next to the
G while
D guide
www.babyauto.com
EN
17