Safety Regulations; Proper Use; Technical Data - Einhell Royal RGS 18 Mode D'emploi

Anleitung RGS 18_SPK7:Anleitung AGSS 18
Packaging
The unit is supplied in packaging to prevent it from
being damaged in transit. The raw materials in this
packaging can be reused or recycled.
When using the equipment, a few safety
precautions must be observed to avoid injuries
and damage.
Read the operating instructions carefully and
comply with them at all times. It is important to
consult these instructions in order to acquaint
yourself with the unit, its proper use and the
important safety regulations.
Keep this manual in a safe place, so that the
information is available at all times.
If you give the equipment to any other person,
make sure that you pass on these operating
instructions as well.
We can accept no liability for damage or
accidents which arise due to non-compliance
with these instructions.
1. Layout (Figure 1)
1 Grass cutter blade
2 Wheels
3 Safety lock-off
4 ON button
5 Telescopic long handle
6 Clamp coupling for telescopic long handle
7 Handle grip
8 Charging station
9 Blade guard
10 Battery charger
11 Shrub cutter blade
2. Explanation of the warning signs on
the machine (figure 2)
1. Important! Read the operating instructions
and follow the warnings and safety
instructions
2. Keep all other persons away from the danger
zone.
3. Caution! The cutter blades continue to run
after the motor is switched off. Wait for the
blades to come to a standstill.
Risk of injury!
4. Important! Always wear goggles when
working with the grass and shrub cutter.
5. Dispose of batteries correctly!
05.07.2007 8:38 Uhr Seite 9
6. Protect the tool from the damp and never
expose it to rain.

3. Safety regulations

The corresponding safety information can be found
in the enclosed booklet.

4. Proper use

The device is designed for cutting the edges of
lawns, small areas of grass and shrubs and hedges
in private and hobby gardens.
Tools for private and hobby gardens are not suitable
for use in public facilities, parks and sport centers,
along roadways, on farms or in the forestry sector.
For the tool to be used properly it is imperative to
follow the instructions set out in the manufacturerʼs
directions for use.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important! It is prohibited to use the tool to chop
material for composting because of the potential
danger to persons and property.

5. Technical data

Cutting width of the grass cutter:
Cutting width of the shrub shears
Cutting thickness of the shrub shears
Running time max.:
Speed n :
0
Battery pack:
Charging time:
Protection class:
L sound pressure level:
pA
L sound power level:
WA
Vibration a :
hV
Weight:
Charger:
Mains voltage:
Rated voltage output:
Rated current
Sound and vibration were measured in accordance
with EN ISO 3744.
GB
90 mm
170 mm
8 mm
90 min
1150 rpm
Ni-Cd / 18 V d. c. / 1.5 Ah
7 -9 h
III
77.5 dB
88.5 dB
≤ 2.5m/s 2
2 kg
230 V ~ 50 Hz
24 V d. c.
400 mA
9