How To Replace The Filter Bag - Hoover COMMERCIAL MPWR 40V Guide D'utilisation

Maintenance - How To Replace The Filter Bag
WARNING:
DAMAGED, LEFT OUTDOORS, OR DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1.888.768.2014 PRIOR TO CONTINUING USE.
WARNING:
SERVICING. DO NOT USE VACUUM WITHOUT INNER FILTRATION BAG IN PLACE.
WARNING:
INNER FILTRATION BAG AND CAUSE IT TO BURST EVEN THOUGH IT IS ONLY PARTIALLY FULL. CHANGE THE BAG OFTEN WHEN CLEANING
THIS TYPE OF MATERIAL.
1
Unzip the Filtration
Bag Case completely.
3
Gently pull the cardboard
collar on the filtration
bag up to engage the self
sealing lock and remove
from the bag dock.
12
Discard.
IF APPLIANCE OR CHARGER IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED,
TO REDUCE THE RISK OF PERSONAL INJURY, UNPLUG BEFORE CLEANING OR
VERY FINE MATERIALS, SUCH AS FACE POWDER OR CORNSTARCH MAY SEAL THE
2
Pull the cardboard
collar on the filtration
bag downward to
release the bag dock
from the dock port.
4
Slide a new filtration
bag collar firmly into
the bag dock ensuring
all hooks on dock door
are inserted on the
cardboard collar.