Flash Mode Ttl / M / Multi; Flash Mode - Ttl Autoflash - Hahnel MODUS360RT Manuel D'utilisation

Pressing the camera shutter halfway or pressing any flash button will
wake up the flash unit.
• Used as a slave flash, it will enter sleep mode after approx. 60
minutes. Pressing any flash button will wake up the speedlight.
• Disabling Auto Power Off function is recommended when the flash
is used off camera. (See C.Fn-St page 28)
3
This flash has three flash modes: TTL, Manual (M), and MULTI
(Stroboscopic). If camera shooting mode is set to fully automatic, some
modes will not be available.
Select "fill flash" on the camera menu.
Flash Mode – TTL Autoflash
In TTL mode, the camera and the flash will work together to calculate
the correct exposure for the subject and the background. In this mode,
multiple TTL functions are available: FEC, HSS, second curtain sync,
etc. These can be controlled with the Modus 360RT or from the camera
directly.
Press <MODE> Mode Selection Button to enter TTL mode. The LCD
panel will display <TTL>.
• Press the camera release button halfway to focus.
• When the shutter button is fully pressed, the flash will fire a preflash
that the camera will use to calculate exposure and flash output, the
instant before the photo is taken.
Flash Mode
TTL / M / Multi
• Press < MODE > Mode Selection
Button and the flash mode will
display on the LCD panel one by
one with each button pressing
13