Care And Cleaning; Cleaning The Filters; Cleaning The Spray Arms; External Cleaning - Electrolux ESF 6610ROW Notice D'utilisation

9. CARE AND CLEANING

WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.

9.1 Cleaning the filters

C
B

9.2 Cleaning the spray arms

Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.

9.3 External cleaning

Clean the appliance with a moist soft
cloth.
1. Turn the filter (A) counterclockwise
and remove it.
C
A
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3.
Remove the filter (B).
A1
4. Wash the filters with water.
5. Put the filter (B) to its initial position.
Make sure that it assembles correctly
A2
under the two guides (C).
6. Assemble the filter (A) and put it into
position in filter (B). Turn it clockwise
until it locks.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Dirty filters and clogged spray
arms decrease the washing re-
sults.
Make a check regularly and, if
necessary, clean them.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
ENGLISH 33