Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
Turn on the power switch.
(Press " ")
Max
1.4
1.0
0.6
During use, the power
indicator lights up.
When the water has boiled, the power
switch turns off automatically.
•
The kettle takes around 3 minutes to boil.
(
Water temperature 23°C, room
temperature 23°C, water to max level
•
To stop boiling before the
water has boiled, turn off
the power switch.
Note
•
Immediately after the water has boiled,
do not force the kettle to continue heating
the water by keep pressing the power
switch. (It may cause malfunction.)
Empty-use prevention function
When the power switch is on without water, an empty-use prevention function works to
automatically turn off the power in order to prevent accidents and malfunction due to
overheating.
1 Allow the body to cool sufficiently.
Remove the body from the power base and fill the water.
Place it on the power base and turn on the power switch again.
* If you boil the kettle without water, it may smell strange.
NC-DK1(PZ05E669).indb
21
Start boiling the
water.
(
)
Power indicator
lights up.
Max
1.4
1.0
0.6
)
Max
1.4
1.0
0.6
4
Remove from the power
base and pour.
Max
1.4
1.0
0.6
After use, pour out any remaining
water.
* Keep the lid closed when pouring
away the water.
21
2016/07/04
12:47:11
Publicité
Table des Matières
