Connecting An Already-Paired Device Via Bluetooth; Disconnecting A Bluetooth Connection - Yamaha MCR-B020 Mode D'emploi

LISTENING TO MUSIC FROM YOUR Bluetooth DEVICE

Connecting an already-paired device via Bluetooth

Once pairing has been completed, connecting a Bluetooth will be easy the next time.
Connecting from this unit
1 5 : 3 0
1 5 : 3 0
B T _ _ _ _ _
Connecting from the Bluetooth device
1 In the Bluetooth settings of the Bluetooth device, turn Bluetooth on.
2 From the Bluetooth connection list of the Bluetooth device, choose this unit (MCR-B020 Yamaha).
The Bluetooth connection will be established, and the front panel display of this unit will indicate the name of the
Bluetooth device.
Bluetooth connections cannot be established from the Bluetooth device when this unit is in ECO standby (☞ P. 5).

Disconnecting a Bluetooth connection

If any of the following operations are performed while a Bluetooth connection is being used, the Bluetooth connection will be
disconnected.
• Switch the audio source other than Bluetooth.
• Turn the unit off.
• Turn off the Bluetooth setting of the Bluetooth device.
10
En
Press the BLUETOOTH source button to switch
the audio source to Bluetooth.
The Bluetooth indicator will blink in the front panel display;
this unit will search for the Bluetooth device that was most
recently connected via Bluetooth, and will then establish a
connection (You must first turn on the Bluetooth setting of
the Bluetooth device).
When the Bluetooth connection has been established, the
Bluetooth indicator will light, and the name of the Bluetooth
device will be displayed.