Nilfisk POWER ECO Instructions D'utilisation page 6

E
Instructions for use
n
Before using the machine make sure
g
that the voltage shown on the rating
l
plate corresponds with the mains
voltage.
i
The machine is supplied with dustbag,
s
prefi lter and exhaust fi lter.
h
Start and stop
Start
Pull out the cord and plug the machine
into a wall socket. Start the vacuum
cleaner using the start/stop button on
top of the vacuum cleaner.
Stop
Turn off the machine using the start/
stop button. Unplug by grasping the
plug, not by pulling on the cord.
3
A
Connecting hose, tube and nozzles
1. Insert the hose connector into the
suction inlet and press until the
hose engages with a click.
2. Connect the bent tube to the tube
and turn it until they engage with a
click.
3. Connect the tube and nozzle and
twist until they engage with a click.
4. The tube is telescopic and can be
adjusted to your height.
Push the button in the middle
of the tube to release the length
adjustment lock. Adjust the tube to
desired length.
Disconnect hose, tube and nozzle
• Disengage the nozzle from the
tube by pressing the button.
• Disengage the hose from the
tube by pressing the button.
• Release the hose connection
from the suction inlet by pressing
the locking mechanism and
remove.