I - Safety Instructions - CFI EXTEL Code Guide D'installation Et D'utilisation

I - SAFETY INSTRUCTIONS

IMPORTANT!
• Please read the user manual carefully
before installing or using this product
• If you are installing this product for
someone else, remember to leave the
manual or a copy of it with the end user
Warning
• The various items should be dismantled by
an authorised technician only.
Safety measures
• For operation of this system in complete
safety, it is essential that the installers,
users, and technicians follow all of the
safety procedures
manual.
• Specific warnings and warning symbols
are given for items if necessary.
• The product must be set up according to
the applicable standards in the country
where it is installed (NFC15- 100 for
France).
• Damage caused by failing to adhere to the
manual nullifies the warranty. We will not
accept liability for damage resulting from
non-compliance! We will not accept liability
for any harm to goods or people caused
by improper handling or failure to adhere
to safety instructions.
• This product was manufactured in total
compliance with safety guidelines. To
maintain this status and provide for the
best possible conditions of usage, the user
must adhere to the safety instructions and
warnings in this manual.
This symbol indicates a risk of electrical
shock
or short-circuiting.
- Only use this product with electrical current
in the following ranges: 100-240 volts and
50-60 hertz. Never try to use this device
with an electrical current outside of these
ranges.
described in this
Extel - Code - 720309-720311
- Verify that all of the electrical connections of
the system are consistent with the usage
instructions.
- In commercial establishments, be sure to
adhere to accident prevention rules for
electrical installations.
- For schools,
workshops, etc., the presence of qualified
personnel is needed to monitor operation
of the electronic devices.
- Adhere to the usage instructions for other
devices connected to the system.
- Contact a person with experience if you
are unsure about how to operate the
system or about the safety of devices.
- Never plug in or unplug electrical devices
with wet hands.
- When installing this product, verify that
the power wires are not at risk of being
damaged.
- Never replace damaged electrical wires
yourself! If an electrical wire is damaged,
remove it and ask for help from a person
with experience.
Warning
This logo denotes that devices
which are no longer in use must
not be disposed of as household
waste. They are likely to contain
hazardous substances that are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling
collection service provided by your local
council.
Pour en savoir plus :
www.quefairedemesdechets.fr
training equipment,
EN9