G - Technical Settings; H - Warranty; Warranty Conditions - CFI EXTEL Code Guide D'installation Et D'utilisation

G - TECHNICAL SETTINGS

Screen
Video Format
Resolution
Power supply
Dimensions
Camera
Angle
Power supply
Night vision
Dimensions
Weather protection

H - WARRANTY

• The warranty is void if parts have been
dismantled. Clean the outside with a soft,
dry cloth only. Before cleaning, disconnect
or switch off the video surveillance system.
NOTE
• Do not use any gasoline or carboxylic acid,
alcohol or similar treatment. In addition
to damaging your device, the fumes are
also hazardous to your health and are
explosive.
• Do not use any tool that can conduct
voltage (wire brush, sharp tool, etc.) for
cleaning.
If necessary, consult our technical website:
www.cfi-extel.com
Latest version of the downloadable
instructions in colour: www.cfi-extel.com
EN8
MONITOR
7" (18cm) colour
PAL/NTSC
1024 x 600
17 V - 1.5 A (provided by power supply unit)
197(H) x 147(W) x 14(D) mm
Door plate
CMOS 700 VTL
95° (H) / 48° (V)
13 V – 200 mA max.
Up to 1m
182(H) x 61(W) x 32(D) mm
IP54

WARRANTY CONDITIONS

• This product is guaranteed for parts and
labour in our workshops.
• The warranty does not cover: consumables
(batteries, etc.) and damage caused
by
installation, external intervention, damage
due to physical or electrical shocks,
dropping or atmospheric phenomena.
• Do not open the device as doing so will void
the warranty.
• Clean with a soft cloth only, no solvents.
The warranty is void if parts have been
dismantled. Clean the outside with a soft
dry cloth only. Before cleaning, disconnect
the equipment or switch it off at the mains.
• The receipt or invoice is proof of purchase
date.
Extel - Code - 720309-720311
misuse, improper use, improper