Water Outlet - Schulthess WA14 Export Notice D'installation

The water supply valve for hot water is
marked with a red line at the mouth, the
neutral valve is determined for the cold
water.
Connect the hot and cold water water
►
hose to the respective water tap.
Important
The hot water temperature must not
exceed 70 °C.
Higher water temperatures must be
reduced by means of a mixer con nec ted
in series.
Aquastop
In the case of appliances with aquastop,
►
connect the aquastop valve to the water
tap as shown in the sketch.
Carefully open the water tap to make
►
sure that the connections are not
leaking.
Warning
Danger of electric shock!
Do not immerse the aquastop valve in
water.

Water outlet

Machines with drain valve
The connection for draining the water is
to be found low down on the back of the
machine. (plastic tube ø 50 mm).
ø 50 mm
Machines with drain pump
Important
Risk of water damage!
A drainage hose that is insufficiently
secured, may slip out of the sink or the
connection during draining and cause
water damage.
Do not kink or protract the hoses.
►
EN 51