Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
24
> Install waste and water protection
plugs and keep in place until toilet
bowl is ready to be installed.
27
> Install mounting bolts onto carrier
>
with spacing at 7-⅛".
10
70300131_Mounting_Wall carrier_standard
25
>100 mm
>4"
> Check that there are at least 4"
from the bottom of the waste pipe
to the finsihed floor (FF) to ensure
proper clearance for the toilet bowl.
28
> Secure mounting bolts to carrier.
>
> Slip plastic protective covers over
bolts.
26
> Thread locking nuts onto mounting
bolts.
29
1
1
1
2
2
> Remove actuator cover plate.
2
Publicité
Table des Matières
