General Safety Instructions - Villeroy & Boch Finion Manuel D'installation

2.3 General safety instructions

Applies only for products with the "Mood Light" function.
Warning!
Danger of electrocution!
Touching live parts can lead to severe injury and even death.
The unit is designed to operate using 230 V 50 Hz alternating current. Installation of
•
product only to be performed by a qualified installer.
When carrying out work, make sure that the lead is disconnected from the mains and secured
•
against reconnection.
Warning!
Danger of electrocution!
Touching live parts can lead to severe injury and even death.
Live parts, excluding parts supplied by SELV circuits at voltages not exceeding 12 V, must not
•
be accessible to a bathing person.
Warning!
Danger of electrocution when cleaning and during maintenance!
Touching live components during cleaning and maintenance can lead to severe injury and even
death.
When cleaning and carrying out maintenance work, make sure not to touch live parts.
•
Warning!
Danger of electrocution!
Live components that have not been fitted or fixed properly can lead to severe injury and even
death.
The appliance is only to be used with the power supply unit provided with the appliance.
•
All electrical, electromagnetic components of the product and that are required for
•
installation (with the exception of the remote control) must be securely attached to the bath/
floor/wall in accordance with the installation instructions and National regulations.
To prevent injury and even death, all Live parts must be securely attached to the bath/ floor/
•
wall in accordance with the installation instructions and National regulations.
Other parts incorporating electrical components, except remote control devices, must be
•
located or fixed so that they cannot fall into the bath.
www.villeroy-boch.com // V 1.1 // 24.10.2017 //
7