Brother QL-570 Guide D'installation Et De Configuration page 16

14
STEP2 Installing the software
6
After restarting the computer,
connect the USB cable to the
machine.
As the caution label is put on the USB
port of the machine, remove it and
then connect the USB cable.
7
Connect the USB cable to the USB port of Macintosh
Press ON/OFF button ( ) of the machine to turn on the power.
When connecting the machine to Macintosh
connected correctly. At that time, connect the machine directly to the USB port
of Macintosh
8
Double click the drive where Mac OS
order of [Applications]-[Utilities]-[Printer Setup Utility].
Then, click Add and choose USB at the top of the screen (in Mac OS
Choose QL-570 from the list and click Add again to add the printer to Printer Setup
Utility.
9
When the screen returns to Printer List
screen, check the "QL-570" is added, and
close Printer List screen.
Now you can use the machine.
For details on software, see the P-touch
®
.
USB port
USB cable
®
via USB hub, it may not be
® X is installed, and click in
®
Editor Help.
Power cord slot
Power cord
® .
®
X 10.3.x).